Installer
One program to install, update or remove Wayglass.
Checking the latest version…
What you'll need
- A computer with macOS, Windows 10 or later, or Linux.
- An ENET cable (OBD to Ethernet). If your computer has no Ethernet port, you'll need a USB to Ethernet adapter.
- The car with the ignition on. A charged battery or a charger connected.
- Internet on the computer during installation (Wi-Fi is fine).
- About 15 minutes.
Step by step
Download the installer
Use the button above for your computer. The file is saved to Downloads as wayglass (wayglass.exe on Windows); if an older one is there, delete it first. Have the installation code you got with your purchase ready.
Connect the car
The ENET cable goes into the OBD port under the steering wheel and into your computer. Switch the ignition on and wait until the screen has started.
Start the installation
Open Terminal (macOS, Linux) or PowerShell (Windows) and type the commands. Replace XXXXX-XXXXX with your code; if it starts with WG-, type it as it is.
cd ~/Downloads chmod +x wayglass xattr -c wayglass ./wayglass install --code XXXXX-XXXXXcd "$(xdg-user-dir DOWNLOAD)" chmod +x wayglass ./wayglass install --code XXXXX-XXXXXcd $HOME\Downloads .\wayglass.exe install --code XXXXX-XXXXXConfirm
On the first connection the installer asks you to confirm that this is your head unit; before installing it shows what it will change and asks whether to continue. Both times type yes and press Enter.
Wait for the restart
The installer restarts the head unit by itself. After the restart, Wayglass appears in the "My Vehicle" menu.
To check: ./wayglass status (.\wayglass.exe status on Windows). The last line says whether Wayglass works or is ready and waiting for CarPlay.
Installed from a computer already?
Updates and new products can be installed from a USB stick: enter the code on the site, download the archive and plug the stick into the car.
Install from a USB stickIf something goes wrong
- The installer shows what exactly failed and what to do next.
- If the connection drops, start it again: it finishes the installation or restores the head unit as it was.
- You can remove Wayglass at any time with ./wayglass remove (.\wayglass.exe remove on Windows).